The China Towel Trading Network tells you all the types of towels. Towel fabrics are fabrics in which the warp yarns form an annular loop on the outer surface of the fabric. Because the unevenness of the loop is different, the distribution of the loops is different, the structure and processing are changed, and the appearance and hygroscopicity are different. According to the difference in use, construction, processing, material, disposal, weaving, etc., there are various types as follows. First, by use classification 1. Face towel: A face towel is a towel that is usually referred to. It is mainly used for face washing, and can also be used for toe caps and necks. The need for a face towel is: the latitudinal density should not be too tight to adhere to its softness; the terry is slightly longer to cover more, in order to adhere to its full appearance, enhance its water absorption function and water storage function. 2. Scarf: The towel is a bed ornament. The texture is tight and conflict-resistant. The loop should not be too long or too long. It should be arranged in a single-faced loop for the purpose of conditioning, extending the application period, and reaching the easy wash. Yi Ping's intention. 3.: Bath towels are not only used for rubbing shoulders after bathing. They can also be used as children's bedding. The tropical area also serves as a shawl towel. According to these uses, the terry of the bath towel should be high and dense, with high warp and weft density. The bath towel is quick to absorb moisture, has good water storage function, and has a warming effect. 4. Square towel: Square towel, also known as sweat towel, has the same length and width. It can be used as a handkerchief. It is suitable for summer sweating and can also be used as a baby's face towel. Quality requirements are the same as face towels. 5. Towels: The towel is a towel fabric for summer and autumn, and can be used as a clip. The terry should be high and dense, with a full-featured and soft-looking appearance effect, reaching the warmth that the towel should have. 6. Napkins and tea towels: Napkins and tea towels are commonly known as complete sets of fabrics and are auxiliary fabrics for tableware. Not only is it full and solid, but it should also have the physical function of water absorption and heat insulation. 7. Terry cloth: The terry of the terry cloth should be constructed according to the requirements. The towel fabric can be cut for uniforms and has a certain soft and hygroscopic comfort. 8. Other towel fabrics: including bath mats, upholstery, tablecloths, window coverings, sofa backs, and women's hygiene products. Second, the structural classification 1. According to the number of weft cycles In a thorough arrangement of the towel fabric, the loops formed by the different number of weft loops can be divided into three latitudes, four latitudes, five latitudes and six latitudes. Three-weft towel: The three-weft towel is a fabric in which the ground warp and the weft are interlaced, and a set of loops is formed by the average of three weft yarns. Its characteristics are: the shortest floating point of the terry warp, so the fabric texture is firm and the terry is dense, soft and solid and flexible; the water absorption function and water storage function are better than other towels with different latitudes. Four weft towel Double-sided towels, according to their loop arrangement, can be divided into single loops, single and double loops, double loops, double triple loops and double four loops. 1 Single loop: between each latitude and longitude arrangement point on the front and back sides of the fabric, a loop is called a single loop. 2 single and double terry: each latitude and longitude of the front of the fabric is staggered, and two stacked loops are used. If it is not, a loop is called, which is called a single double loop. 3 double terry: At each arrangement point of the front and back sides of the fabric, there are two stacked loops, called double terry. 4 pairs of three loops: in each of the arrangement points on the front and back sides of the fabric, three and two stacked loops, called double triple loops. 5 pairs of four loops: the front side of the fabric has four stacked loops in each arrangement, and each arrangement point of the discards has two stacked loops, called a double quadruple pattern. Striped towel A striped towel, also known as a trick towel or a fancy towel, is arranged on the towel to form a loop according to the pattern of the marking; it is also possible to form various kinds of markings using different coloration of the dyed yarn. Because the terry of the striped towel is equipped according to the marking pattern, the texture is soft and solid, but it is not resistant to twisting, and the handcuffs are poor. Therefore, it is used for some facial tissues, mainly for wipes and towels. Third, according to the composition of the ground According to the structure of the warp yarn of the towel fabric, it can be divided into single warp, single double warp and double warp towel. (1) Single towel Towels A completely arranged two warp yarns, all of which are single yarns. Only one ground is penetrated in each molar. The whole fabric is scattered like this, called a single towel. The single towel is too loose and soft, not resistant to twisting and rubbing. Can be used for dish cloth, dust cloth and some face towels. (2) Single and double towel The two warp yarns in a thorough arrangement of towels are composed of a single warp and a double warp. When wearing a warp, the top molar is a ground and the second molar is two ground. Sequentially distributed to form a single pair of towels. Single and double towel can not only adhere to the softness of the fabric, but also contrast strong and durable. Therefore, the arrangement of the face towel, the square towel, the bath towel, the napkin, and the terry cloth usually adopts a single and double warp structure. (three) double towel Towels A thoroughly arranged two warp yarns are double warp, each of which has two warp yarns, and the whole fabric is also scattered like this. The double-pass towel has a hard texture but is of a strong construction; it can be used for bath towels and terry cloth, as well as for towel blankets and towel bedspreads. Third, processing classification 1. Weaving first and then drifting The towel is woven first, then bleached, dyed or printed fabric. Depending on the color of the dyed dye and the function of the dye used, the following categories can be classified. 1 full color towel After the dyeing of the blank towel, the color of the whole fabric is a color, such as all white, green lotus, silver gray, red, blue, green, yellow, sauce, orange, etc. medium or medium light. Except for the white bleaching of sodium hypochlorite or the oxygen bleaching of hydrogen peroxide, the other colors are mostly dyed with higher dyes such as reactive dyes and insoluble azo dyes, and have better washing and soap-resistant vehicles. There are many types of face towels, bath towels, square towels and napkins. 2 printed towels Printed towels are available in direct printing, discharge printing, anti-dye printing, paint printing and spray printing. Direct printing: It is printed directly on the fabric through the flower board, usually using soluble resilience dyes, rejuvenating dyes, fast pigments and reactive dyes. Its primary features are: the show is bright and the color is strong. However, the clarity of the overprinting level is poor, and sometimes the markings are thicker, which is a disadvantage of direct printing. The characteristics of the discharge printing and anti-staining printing products are: the color is bright and colorful, the markings are clear and beautiful, and the stacking defects between overprinting and overprinting are not as simple as direct printing. This method is basically the same or similar to the printing method of cotton. Paint printing: It is a color paste composed of pigments, adhesives and cross-linking agents, which is directly printed on the fabric. The characteristics are: simple technology, simple color sorting, complete chromatogram. In addition to the poor washing fastness, other fastness such as acid and alkali resistance, solvent resistance, ironing, sun exposure and climate are also good. Especially in these years, because of the appearance of fluorescent paints, the paint-printed towels have been added with singularity and the scale of use has become increasingly widespread. Sprayed product: It is sprayed onto the fabric by the spray coloring method of the dye paste. Not only the color is uniform, but also the same color can be printed from the deep, shallow or shallow to deep, and the precise pattern is printed. It can also print the facade and the concave and convex surface, which is not enough for other printed products. 2. First drifting and weaving It is a fabric that is dyed and woven first, and is classified according to the color of the yarn. (1) Color bars and color banners The color yarn is used to make a note or a square weave. The structure is simple, simple and generous. It is mostly used for face towels, small bath towels and square towels; some are used in terry cloth to make t-Shirts, pajamas and seaside clothes. (2) Jacquard towel It is a jacquard arrangement that constitutes a zebra pattern, with a vivid image and a firm texture. There are two types of flat jacquard and concave jacquard. The former is woven into stripes by the terry of the colored yarn; the latter uses rugged arrangement to form the markings; it can also be used to fabricate a variety of monochromatic and mixed color terry using a variety of colored raised yarns, equipped in several colors . For example, red, yellow and white three kinds of wool warp yarns can be woven into red, yellow and white monochrome; red and white mixed yarns can be woven into light red fabric; yellow and white monochromatic yarns are mixed and woven into light Yellow markings; mixed with yellow and red single yarns can be woven into orange red markings. In this way, three color yarns can be woven into six color fabrics. Used in towels, bath towels and face towels. (3) velvet woven towel The towel is woven in two steps. The first step of the list is to weave a strip of cloth of a certain length and width according to the marking requirements of the weaving part. Then we draw a note from the regular warp of the zebra cloth and roll it onto the bamboo to make the weft. The second step is to weave the weft into the weft. The two ends of the towel are made into a picture. The characteristic is: the zebra pattern appears velvety, and the workmanship is precise, much like embroidery. Suitable for cooperation pillows and towel bedspreads. (4) Applique towel The applique towel is cut into trousers and sewed on the fabric of the colored strips. It looks like satin embroidery and is artistic. Suitable for towel, towel, towel tablecloth and towel bed cloth. Secondly, there are satin or satin toweles with silky satin on both ends or ends of the towel, and a towel with long and short loops. For more information, please log on to China Towel Trading Network http://maojin.99114.com , wholesale quality towel purchase, log on to China towel trading network or call directly Basketball Wear,Couple Basketball Jersey,Basketball Jersey,Basketball T Shirts Guangzhou LIDONG Garment Industrial Co., Ltd. , https://www.lidongapparel.com
January 06, 2023